ELA50E IEPE Accelerometer
Main features
Wide frequency response
Rugged design
Corrussion resistant
100mV/g Sensitivity
EMI & RFI shielded
Dynamic Value
Axis Single
Range +/-50g
Voltage sensitivity 100mV/g (+/-10%)
Amplitude nonlinearity +/-1%
Frequency response (+/-3dB) 0.2 ... 12000Hz
(+/-10%) 0.5 ... 9000Hz
Transverse sensitivity < or = 5% (max.)
Electrical
Excitation Voltage 18 -- 28Vdc
Supply current 2 -- 10mA
Output impedance < 100 ohm
Bias output voltage 12 -- 14Vdc
Ground insulation > or = 10 ^8 ohm
Environmental
Temperature range -40 ... +120 Celsius
Shock limit 2000g peak
Temperature response refer to temperature curve
Physical
Sensing element PZT-5
Sensing element design shear
Casing materials 304 stainless steel
Connector 5/8 - 24, 2 pin
Mounting hole 1/4 - 28
Encapsulation IP65
Weight 80gram
-------------------------------------------------------------------------------------------
The output of the sensor is original vibration signal. And it is suitable for wave profile acquisition.
Maximum cable length should be less than 30m.
Excitation overload is not permitted.
We are also in the positon to supply IEPE accelerometer with measurement range of +/-10g, +/-500g, etc.